Hydraulic Sample Press is the good press machine for cutting test samples for textiles,Rubbers and soft plastic,Cork,Soft wood,Paper,Cardboard,EVA,Leather prior to testing.
Hydraulic Sample Press
1.It is hydraulic driven system uses top quality hydraulic parts ensure the qualtity of press machine.
2.It is extremely simple to use with easy adjustment of the cutting stroke.Just put the smaple material on the bed of machine then put the die tool on the material,move the upper plate over the the die tool,push the button and then the upper plate will cut out the machine.
3.The cutting force can adjust and control push buttons with time delay and required double hand operation ensure complete operator safety.
4.Gerson have different model from 5 tons,8 tons, 10 tons,12 tons,15 tons ,18 tons,20 ton ,22 tons,25 tons,27/28 tons for small size machine .also have 30 tons to 500 tons for big size.
5.All Gerson machine can custom built.welcome to contact Gerson.
The below specification is for the above photo.
Model
GRA-220
GRA-270
GRA-270M
GRA-270L
Maximum cutting force
22T
25T(27T)
25T(28T)
25T(28T)
Table area
900×430mm
1000×500mm
1000×500mm
1000×500mm
Swing arm width
370mm
370mm
500mm
610mm
Cutting stroke
90mm
90mm
90mm
90mm
Motor power
1.1KW
1.5KW
1.5KW
1.5KW
Electric Supply Voltage
3×440/415/400/380/220/200V, 50/60 Hz
Single phase 240V/220V, 50/60 Hz
Packing size
1050×1000×1500mm
1150×1200×1500mm
1150×1200×1500mm
1150×1200×1500mm
N.W(with oil)
650kg
960Kg
1050kg
1200kg
G.W
740kg
1120Kg
1210kg
1360kg
Related Products:
Hydraulic Sample Press Gerson brand hydraulic sample press that used for die cutting sample .This small hydraulic press…
