When using Gerson die cutting machine ,the working pressure is insufficient .
Failure Analysis that may check :
1.The material layer is too thick .For example ,nomal cutting one layer ,but the worker die cut many layers .
2.The cutting stroke is too low for the cutting die.
3.oil inlet filter is blocked.
4. oil pump badly worn or broken.
5.The hydralic oil is not enogh.
The following Solution for the Gerson machinery:
1. Reduce material layer until one layer;
2. Adjust to the appropriate position;
3. Cleaning or replacing the filter;
4. Replace the oil pump.
5.Add enough hydraulic oil.
