25 ton clicker press

25 ton clicker press is 25T ton pressure die cutting press used for cutting semi-rigid material also it can be used for cutting soft material incluidng leather ,paper,cardboard,foam,eva,pvc,epe,plastic ,rubber ,fabric etc.,

1.25 ton hydraulic press with 1000mm plus 500mm cutting table size.Gerson also have 8 ton,10 ton,12 ton,15 ton,16 ton, 20 ton ,22 ton,25 ton,27 ton,28ton clicker press.The cutting table size can custom build based on your material.

2.This 25 ton press ,operated by double hand ,reliable and safe.Just put the material on the cutting bed.Then put the die tool on the material where you want to cut out .move the upper beam over the die.Then press the pushbutton by your double two hand.The machine will cutting the material out by the die which you want.

3.This is hydraulic driven system ,special design by Gerson .Using top hydraulic parts and components which make sure high qulity and long time using for the press machine.

4.Gerson also have othe press machine ,if you want to know more information ,please contact us at any time.

5.The following specification is for the above model machine. Gerson have others ,you could click the other machine in the web.

Model	Cutting Table	UP Beam Head	Max Pressure	Net Weight
GR-270L	1000×500	610mm	25T–245Kn	1050 (kg)
GR-270M	1000×500	500mm	25T–245Kn	1030 (kg)
GR-270C	900×450	500mm	25T–245Kn	900 (kg)
GR-250L	1000×500	370mm	25T–245Kn	990 (kg)
GR-250M	900×450	370mm	25T–245Kn	880 (kg)
GR-220L	1200×500	500mm	22T – 216Kn	1060 (kg)
GR-220M	900×450	370mm	22T – 216Kn	880 (kg)
GR-220C	900×430	370mm	22T – 216Kn	630 (kg)
GR-10C	600×300	300mm	8T – 78 Kn	430 (kg)