Gerson cutting press is famous brand to focus on die cutting solution.The swing beam cutting press is also called swing arm cutting press which have swing beam or swing head.
This kind of cutting press is a machine that cuts shapes out of rolls of soft material, such as rubber, cardboard, or leather, using a sharp metal piece called a die.
8 ton and 10 tong swing beam cutting press:
1.Easy to operate with swing arm and button press.
2.Economic cost and stable working function.
3.Two hands switches operate to ensure the operator is safe and easy.
4.The position of the swing arm is adjusted by the upper handwheel on the top of clicking press,which can obtain the best cutting position ,which can increase work efficiency and prolong the service life of cutting dies and cutting boards.
Model
GSB-8
GSB-10
Maximum Cutting Force
8Tons
10Tons
Cutting speed
0.085m/s
0.085m/s
Adjustable stroke
5-60mm
5-60mm
Tension distance
60-130mm
60-130mm
Cuttting table size
650×330mm
650×330mm
size
660×780×1500mm
660×780×1500mm
Motor Power
0.75KW
0.75KW
Net Weight (N.W.)
550Kgs
600Kgs
10 ton to 25 ton swing beam cutting press GSB
Model
GSB-2C/12/14/20/25
Cutting Force
12,14,20,25 Tons
Sway Arm Width
330X450mm,350X450mm,450X550mm
Stroke Adjustment
5-55mm
Distance Between Upper Table And Lower Table
60-140mm
Table Area
900X400mm,1000X500mm
Electric Supply Voltage
3×440/415/400/380 /220V, 50/60 Hz
Motor Power
0.75kw,1.1kw,1.5Kw
Packing Size(LXWXH)
1100X1100X1700mm
Weight
1000Kg/1050kg/1100kg/1250kg
Hydraulic oil (46#)
50 Liters
22 ton and 27 swing beam cutting press GRA
1.Automatic stroke-end setting-up to use cutting knives of different heights without any adjustment.
2.Control push-buttons with built-in device for 5/10 of second maximum delay operation to ensure positive safety.
3.Two push-buttons and one potentiometer to set the cutting power.
4.The main control organs are covered by international patents.
5.The cutting force from 22 tons to 27 tons.
6.Three button handle is available.
Model
Cutting Table
UP Beam Head
Max Pressure
Net Weight
GRA-270L
1000×500
610mm
25T–245Kn
1050 (kg)
GRA-270M
1000×500
500mm
25T–245Kn
1030 (kg)
GRA-270C
900×450
500mm
25T–245Kn
900 (kg)
GRA-250L
1000×500
370mm
25T–245Kn
990 (kg)
GRA-250M
900×450
370mm
25T–245Kn
880 (kg)
GRA-220L
1200×500
500mm
22T – 216Kn
1060 (kg)
GRA-220M
900×450
370mm
22T – 216Kn
880 (kg)
GRA-220C
900×430
370mm
22T – 216Kn
630 (kg)
GRA-10C
600×300
300mm
8T – 78 Kn
430 (kg)
Electric Supply Voltage: 3 phases×440/415/400/380/220/200V, 50/60 Hz,
Single phase:110V/240V/220V, 50/60 Hz
2o ton and 27,28 ton swing beam cutting press GR
1. The swing arm die cutter machine body are welded by steel sheets with firm structure and light weight.
2. It is provided with automatic lubricating system to lessen abrasion and prolong service life.
3. Double hands operation function guarantee the safety of operators.
4. Double-direction oil way design provides stability and reliability.
5. Two modes such as microcomputer controller and PC electronic circuit are optional for controlling the lower limit position of stroke with high precision, flexibility and convenience.
